Unlocking Dual Audio on PS4: Experience Sound Through TV and Headphones Simultaneously

I. Introduction

Playing sound through both the TV and headphones on a PS4 can significantly enhance your gaming experience. By routing audio to two output sources, you can enjoy immersive sound that creates a more realistic gaming environment while also allowing you to tailor the audio levels to your personal preferences. This article will explore how to play sound through your TV and headphones on your PS4, covering the equipment requirements and various methods that you can use to achieve this setup.

II. Requirements for playing sound through TV and headphones on PS4

1. Necessary equipment

To play sound through a TV and headphones on your PS4, you will need the following equipment:

– A PS4 console
– A TV with an HDMI input
– Headphones with a 3.5mm audio jack or wireless capabilities
– Cables and adapters (dependent on the method chosen)

2. Compatibility aspects

In most cases, you won’t need to worry about compatibility issues, as the standard PS4 console, HDMI cable, and 3.5mm audio jack headphones will work perfectly. However, if you use wireless headphones or additional audio equipment (e.g., soundbars or receivers), you may need to ensure compatibility with your PS4 and TV.

III. Method 1: Using the PS4 DualShock Controller

1. Connecting headphones to the controller

One of the easiest ways to play sound through your TV and headphones on PS4 is by connecting the headphones directly to the DualShock 4 controller. This can be done by plugging the headphone’s 3.5mm audio jack into the “Audio Output” port located at the bottom of the controller.

2. Adjusting audio settings for simultaneous output

Once your headphones are connected to the controller, you need to adjust the PS4’s audio settings to enable simultaneous output. To do this, follow these steps:

1. Go to the PS4 home screen and navigate to “Settings.”
2. Select “Devices” and then “Audio Devices.”
3. In the “Output to Headphones” setting, change the option from “Chat Audio” to “All Audio.”
4. Set the TV’s volume to your desired level.

Remember that adjusting the volume through the controller will primarily affect the headphone’s sound level, while the TV volume is controlled separately.

3. Possible limitations

While this method is straightforward and requires no additional equipment, it does have some limitations:

– Wired headphones may restrict your movement while playing.
– The cable connecting the headphones to the controller can be distracting or inconvenient.
– Some users may experience reduced sound quality due to the controller’s built-in DAC (Digital-to-Analog Converter).

IV. Method 2: Using an audio splitter

1. Connecting an audio splitter to the PS4

Using an audio splitter allows you to play sound through your TV and headphones on PS4 without connecting the headphones to the controller. To begin, you’ll need an HDMI splitter with audio output or an HDMI audio extractor. Connect the PS4’s HDMI cable to the input port on the splitter and the TV to one of the HDMI output ports.

2. Connecting headphones and TV to the splitter

Next, connect your headphones to the audio output port on the splitter. This may require a 3.5mm to RCA converter, depending on your headphones and the splitter’s available ports. Once everything is connected, ensure that the splitter is powered (if necessary) and turned on.

Worth a read:  Laptop Storage Lifesavers: How to Expand, Optimize, and Maximize Your Limited Space

3. Why some users may prefer this method

Some users may prefer using an audio splitter instead of connecting headphones to the controller due to the following advantages:

– Eliminates the need for a wired connection between the headphones and the controller
– Provides better sound quality compared to the controller’s built-in DAC
– Allows for greater freedom of movement during gameplay

V. Method 3: Utilizing additional audio equipment

1. Benefits of using additional audio equipment

Implementing soundbars, receivers, or other audio equipment can further enhance the sound quality and create a more immersive gaming experience. These devices often feature multiple input and output options, making it easier to play sound through your TV and headphones on PS4.

2. Connecting the PS4, headphones, and audio equipment

To connect your PS4, headphones, and additional audio equipment, follow these steps:

1. Connect the PS4’s HDMI cable to the input port on your audio equipment.
2. Use another HDMI cable to connect your audio equipment to the TV.
3. Connect your headphones to the headphone output on the audio equipment. This may require an adapter, depending on the available ports.

3. Tips for optimal setup and performance

For the best audio performance, consider the following tips when using additional audio equipment:

– Ensure that all connections are secure and cables are of high quality.
– Verify that your audio equipment is compatible with your PS4 and TV.
– Configure your audio equipment settings to optimize sound quality based on your preferences and environment.

VI. Troubleshooting common issues

1. Common problems and solutions

Some common issues that may arise when setting up dual audio output on a PS4 include:

– No sound output on one or both devices: Check all connections, ensure that the correct input/output settings are selected on your TV and audio equipment, and verify that the PS4’s audio settings are configured correctly.
– Poor sound quality: Make sure that all cables and connections are secure and of high quality. Also, consider adjusting the settings on your audio equipment.

2. Tips for optimal audio quality and performance

To ensure the best possible audio quality and performance, keep the following tips in mind:

– Use high-quality cables and equipment.
– Keep cables organized and free of tangles.
– Adjust your PS4’s audio settings to match your preferences.
– Experiment with different setups until you find the one that suits your needs best.

VII. Conclusion

In conclusion, there are several methods to play sound through your TV and headphones on PS4. Each method has its advantages and limitations, but the key is to find the one that suits your needs and preferences best. Regardless of the chosen method, having the right equipment and understanding the correct setup steps will make the process much easier.

Don’t be afraid to experiment with different methods and configurations to find the perfect balance between immersive in-game sound and the convenience of using headphones. Ultimately, the goal is to maximize your gaming experience by enjoying the best possible sound quality and performance.

Worth a read:  RTX 3090 mining profitability


1. Can you use Bluetooth headphones with a PS4?

Yes, but you may need an additional Bluetooth adapter or transmitter to connect them. Some Bluetooth headphones may also have compatibility issues with the PS4.

2. Why is there a delay in sound when using an audio splitter?

A delay in sound could be due to the splitter processing the audio signal, which may cause latency. Using a higher-quality splitter or adjusting your audio settings may help reduce the delay.

3. How do I connect wireless headphones to my PS4?

To connect wireless headphones, you may need a Bluetooth transmitter or adapter compatible with both your PS4 and headphones. Some gaming headsets also include a wireless transmitter specifically designed for use with the PS4.

4. Can I play sound through my TV and headphones on PS4 without an audio splitter?

Yes, you can connect the headphones to the DualShock 4 controller or use additional audio equipment, such as a soundbar or receiver, to play sound through both sources.

5. Will using an audio splitter affect the video quality on my TV?

No, a high-quality splitter should not affect the video quality, as it merely directs the audio signal to different output sources.

6. Can I control the audio levels independently for the TV and headphones?

Yes, you can adjust the headphone volume through the PS4 controller and control the TV volume separately.

7. What audio formats are supported by the PS4?

The PS4 supports several audio formats, including Linear PCM, Dolby Digital, and DTS Digital Surround. Check your audio equipment’s compatibility with these formats for optimal audio performance.

Table of Contents